CD-1 marine capacitive discharge ignition system 103003 is intended for V8 performance marine applications. The CD-1 marine system includes CD-1 marine ignition module 103001 and coil 103002.

Features:

• Compatible with 8 cylinder marine engines with distributor type ignition.
• 135 mJ spark energy output.
• Digitally set RPM limit with 100 RPM steps from 3,000 to 9,900 RPM.
• Seven switch selectable advance curves and a fixed timing mode cover most Mercury marine high performance applications.
• PC programmable idle stabilization feature.
• PC programmable advance features ranging from a simple RPM based advance curve to a 3D timing map with boost proportional retard.
• Built-in data logging capability with 16 Mbit DataFLASH memory stores up 5 hours of data at 10 samples/second or 30 minutes of data at 100 samples/sec.
• Dedicated input terminals for manifold pressure and an externally activated 0-18 degree retard feature.
• Three general purpose input/output terminals. Two inputs are reserved for data logging. An additional input/output terminal can be used for data logging or as an RPM window switch.
• Fully encapsulated construction. 12 pin Deutsch connector used for signal connections.
• Module and coil are both certified to meet the ignition protection requirements of the NMMA, the USCG, ISO 8846 and SAE J1171 standards for marine applications.
• Compact size. Module is 7.0”L x 5.25”W x 1.9”H. Coil is 4.4”L x 3.2”W x 3.0”H.
• Highly efficient switching power supply based on US Patents 6518733 and 6636021. Less than 5 amp current draw at 8,000 RPM.

*To use the PC link or data logging software, you will require the optional USB interface 102004. To connect a Delphi MAP sensor, you will have to fabricate a wiring harness with the appropriate mating connector or use our MAP sensor harness kit 102006. If your application will trigger the CD-1 direct from a Mercury Marine Hall effect distributor, you must use our 103004 marine rotor or modify the existing rotor using the template in the Appendix.