The NC-2 is a combination progressive nitrous controller and vehicle data logger with the following features:

• Controls two nitrous stages and purge solenoid. 40 amp output drive capability on each nitrous stage.
• Each stage is independently programmable based on throttle position, RPM, vehicle speed, time delay, and first gear lockout. Progressive control based on RPM or time.
• Programmable automatic purge when system is armed.
• Flexible RPM input compatible with high level coil drive (vehicles with coil packs or distributor ignition), standard 12V tach signal, or low level logic drive (newer vehicles with coil-on-plug).
• General purpose input/output (GPIO) terminal. Programmable for use as shift light output, additional stage enable input, or control output for ignition retard.
• Status LED output (ideal for use with arming switch containing LED).
• Built-in data logging. Ideal as basic vehicle data logger during dyno tuning or drag racing. Logs data whenever system is armed. Stores last 5 minutes of data at 10 samples/second.
• Data logged includes throttle position, RPM, vehicle speed, status of all inputs and outputs, and two 0-5V analog inputs.
• 0-5V analog inputs are compatible with Daytona Sensors single or dual channel WEGO systems for logging wide-band air/fuel ratio data.
• Heavy duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping.
• Compact size: is 4.1”L x 2.8”W x 1.1”H (not including mounting feet and terminal block).
• USB interface to laptop PC. Powerful Windows software for programming controller and downloading logged data.