• Keyser's spring unloader can attach to an Accu-Force or Boyd Bilt spring smasher.
• This will allow for safer loading and unloading of heavy stack springs or springs that require a lot of pre-load.
• This spring unloader will keep the springs in a straight line and captured in a pocket where the springs cannot unwind.
• Will this work on different brands of shocks? Absolutely! As long as your coil-over cup fits. The size it needs to be is 3.2. If yours is bigger than that you will need to turn it down some.
• Accu-Force Center to Center (distance between the 2 small holes) is 9 “
• Boyd-Bilt Center to Center (distance between the 2 small holes) is 9.5″
• The two holes on the spring unloaders are for 1” tubing

NOTE: Boyd-Bilt Coil-Over spring unloader does NOT work on the new Boyd Built Pro Elite smasher due to differing dimensions to the standard Boyd Built machine. The Elite machine uses a 1-1/2″ tube.