• Specifically engineered adhesion promoter assures proper paint bonding to our special plastic
• Other automotive grade primers on the market may not work at all or cause severe paint flaking
• Improves adhesion of vinyl by enhancing the bond between adhesive on the vinyl and the substrate, for a more durable, long-lasting application
• Comes in an aerosol spray can for quick and easy application
• A single can coats approximately 5 individual parts

3 STEP PROCESS FOR THE BEST VINYL ADHESION:

1. CLEAN THE SURFACE                                                                                                                   We recommend that our plastic panels be cleaned with a general cleaner/degreaser, finish cleaning with Isopropyl Alcohol and a lint-free cloth.
2.  APPLY ADHESION PROMOTER                                                                                               Apply the MD3 Adhsion Promotor by spraying where your wrap will be applied. Make sure to coat the outside edges well.
3. INSTALL YOUR WRAP                                                                                                                   The vinyl needs to cure for at least 24 hours for proper adhesion.

Tip: Using a heat gun over the entire wrap especially around the edges helps to bond the adhesive to the plastic.